Oven Repair (including Ranges and Cooktops)

sherriwright · #1 (**permalink**) 01-02-2009, 07:28 AM

The analog clock on my double built-in ovens quit working so it was replaced with a digital clock panel. Now I can't get the self clean feature to work because the directions do not apply to the control panel I have now. The replacement has a "mode" button, the clock itself, an "up" button and a "down" button (for setting times etc.).

Any help would be appreciated!!!

Gene · #2 (**permalink**) 01-02-2009, 06:18 PM

You have to set the oven for self clean, using the Sector Switch and the Oven Thermostat for the desired oven. You have to use the digital clock to select the Start and Stop time only, the same way as you did before with the old analog clock. Whoever replaced the clock should leave you the user instructions.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven will not self clean	bob38058	Oven Repair (including Ranges and Cooktops)	0	02-18-2010 01:29 PM
Oven will not self clean	car6311	Oven Repair (including Ranges and Cooktops)	0	12-31-2009 06:45 AM
Can't get the oven to self-clean	scudder	Oven Repair (including Ranges and Cooktops)	1	06-18-2009 08:15 PM
Oven will not heat after self clean	maxwell	Oven Repair (including Ranges and Cooktops)	0	01-09-2009 07:30 AM
Oven Clean will not operate	wolfeman1974	Oven Repair (including Ranges and Cooktops)	2	12-24-2008 06:37 AM

GE OVEN won't SELF CLEAN!!

Oven Repair (including Ranges and Cooktops)

The analog clock on my double built-in ovens quit working so it was replaced with a digital clock panel. Now