Oven Repair (including Ranges and Cooktops)

MarkCT · #1 (**permalink**) 03-18-2011, 05:29 AM

What's the difference between the Controller and the circuit board? The exploded diagram shows the board as an inset, but not how it installs in the backguard. I have a broiler that stays on whenever "bake" is selected and I was hoping to order parts before I pulled it all apart.

MarkCT · #2 (**permalink**) 04-07-2011, 07:42 AM

In case anyone else looks at this, the extra circuit board in the exploded parts diagram is the Simmer-Slect board and is not really part of the backguard. The circuit board attached to the Controller is an integral part of the controller and is apparently not available separately. The overlay is not included with the controller. So if you have popped a small resistor on the circuit board, as I did, you must order the entire Controller.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Controller Board Interchangability	mjlewispe	Oven Repair (including Ranges and Cooktops)	0	02-28-2011 04:08 AM
Main Controller Board or Display Board?	slarson252	Refrigerator & Freezer Repair	0	05-08-2010 07:16 AM
Compressor or Controller Board?	DanS2	Refrigerator & Freezer Repair	3	01-08-2009 06:42 AM
New Controller Board won't light	leadnovel	Oven Repair (including Ranges and Cooktops)	1	05-10-2008 05:53 PM
GE Oven Controller Board Replacement	smtowne@cox.net	Oven Repair (including Ranges and Cooktops)	1	04-11-2008 02:38 PM

Kenmore oven - Controller vs. Board

Oven Repair (including Ranges and Cooktops)

What's the difference between the Controller and the circuit board? The exploded diagram shows the board as an inset, but