|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » No Power or Display |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: PLEB30S9DCB Brand: Frigidaire Age: 1 - 5 years
Oven was working fine, then one night, it just died. For a few days later, we could hear a faint ticking coming from the front left portion of the oven ceiling.
Seems to be no power, but breaker has not tripped. We reset the breaker several times, and nothing comes up on the display, completely blank, no light(s) at all. Although we here the clicking again, then it stops. When I removed the panel, it seems like the circuitry on the inside is severely corroded from grease.This part here http://www.appliancepartspros.com/part_details.aspx?part_id=3781481ℑ=1 Again, nothing works, not even the oven light. Any help would be greatly appreciated. Thank you in advance. PS: I wish to take out the control panel, is there any major current going to the panel? Thru the wires? Little nervous about sticking my hand into something 220, breaker off or on. Ads By Google Related Models Last edited by sheybklyn : 03-05-2011 at 11:16 AM. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GE Harmony Gas Dryer - Won't Power up Display | venicebeachvillas | Dryer Repair | 6 | 01-13-2013 03:35 PM |
| no display but power on | poppy769 | Oven Repair (including Ranges and Cooktops) | 0 | 07-03-2010 07:48 PM |
| No power to display intermintant | cperry12 | Dryer Repair | 2 | 09-13-2009 03:42 AM |
| Whirlpool oven - no power, blank display | KingBiscuit | Oven Repair (including Ranges and Cooktops) | 21 | 05-22-2009 05:04 PM |
| GE advantium display out after power surge | Sayon | Microwave Repair | 4 | 07-26-2008 04:47 PM |