Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Whirlpool Oven problem
Options
Go to last post Go to first unread
Model: GBD307PDS09 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
djupin  
#1 Posted : Friday, December 19, 2008 9:40:16 AM(UTC)
Quote
djupin

Rank: Member

Groups: Registered
Joined: 12/19/2008(UTC)
Posts: 3
My Whirlpool double oven display is blank. Pressing most of the buttons gives a short long short short short beep sequence. Is there anyway to reset this or does one of the modules need to be replaced?

If it a module fault would it be the control panel or the clock control module? I suspect the control module.

Thanks.

Dave Jupin
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Friday, December 19, 2008 10:15:10 AM(UTC)
Quote
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
I would check the power supply first, then the thermal fuse on the back and the control board.
Here's your breakdown Model GBD307PDS09
Nat
Back to top
djupin  
#3 Posted : Friday, December 19, 2008 5:19:59 PM(UTC)
Quote
djupin

Rank: Member

Groups: Registered
Joined: 12/19/2008(UTC)
Posts: 3
I checked the transformer with the power off and got 58.7 ohms on the primary and 2.6 ohms on the secondary. I think that it is OK.

I also checked the thermal fuse on P24 and it seems OK.

The top of the clock control board seems to have some discoloration. I am pretty certain at this point that the board is bad.

I only hope that the display board is also not bad.

Dave Jupin
Back to top
libertyappl  
#4 Posted : Saturday, December 20, 2008 9:53:34 AM(UTC)
Quote
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Sounds like the control board is the problem.

nat
Back to top
djupin  
#5 Posted : Wednesday, December 31, 2008 5:21:12 AM(UTC)
Quote
djupin

Rank: Member

Groups: Registered
Joined: 12/19/2008(UTC)
Posts: 3
I was able to fix the oven by replacing the control board. Several places that I checked did not have the board in stock - seems like maybe there are a lot of failures of this board.

I was able to get the board from Tribles which is a local appliance parts store. They have a few locations and overnighted it to me from Richmond.

I replaced it Christmas eve and we were able to use it on Christmas.

Dave Jupin
Back to top
libertyappl  
#6 Posted : Wednesday, December 31, 2008 5:34:41 AM(UTC)
Quote
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Glad you were able to get it fixed!!

Nat
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Whirlpool oven problems... (Oven Repair (including Ranges and Cooktops))
by chappy801 5/31/2012 6:42:47 PM(UTC)
Whirlpool oven problems with heating. (Microwave Repair)
by double d 7/24/2009 8:15:54 AM(UTC)
intermittent Whirlpool oven problem (Oven Repair (including Ranges and Cooktops))
by jackchaos 2/16/2009 8:31:04 AM(UTC)
Whirlpool oven problem (Oven Repair (including Ranges and Cooktops))
by regent 3/27/2008 5:29:03 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET