|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Oven not reaching set operating temperature |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: JGBP26Gen4 Brand: GE Age: More than 10 years
I apologize in advance if this question has already been and/or answered. I own a GE Gas Range (Model JGBP26Gen4) that is approx 16 years old. The range has never given me any complaints until now. My problem is this:
I turn the oven on to bake at a given temperature (let's say 450 degrees). After about 7-8 minutes, the oven beeps signifying that it has reached operating temperature. However, using two separate oven thermometers, the actual temperature of the oven is only 350 degrees. I've seen on various posting sites that a faulty temperature sensor could be the culprit so I disconnected the sensor and measured the resistance. It read 1092 ohms which, according to experts, is the correct resistance at room temperature. Does anyone know what could be causing the problem? Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HELP - gas oven not reaching temperature | mfeintuch | Oven Repair (including Ranges and Cooktops) | 0 | 12-03-2008 04:16 PM |
| Oven not reaching temp | fpbeck | Oven Repair (including Ranges and Cooktops) | 0 | 09-10-2008 12:04 AM |
| Operating Refrigerator in Cold Temperature Environments | SUhoopfan | Refrigerator & Freezer Repair | 1 | 12-06-2007 03:14 AM |
| Kitchen AId double oven not reaching temp | bobkitchenaid | Oven Repair (including Ranges and Cooktops) | 0 | 11-30-2007 10:03 AM |
| GE Oven not reaching temperature | Dave Roce | Oven Repair (including Ranges and Cooktops) | 0 | 10-18-2007 02:00 PM |