Oven Repair (including Ranges and Cooktops)

KSimmons · #1 (**permalink**) 02-12-2011, 11:31 AM

We recently replaced the EOC board. Now the oven does not heat properly. It was working fine for about amonth after replacing the EOC. Now when set at 350 is only get to about 290

denman · #2 (**permalink**) 02-13-2011, 03:53 AM

Here are your parts
Replacement parts for FRIGIDAIRE FEF387WJCA Frigidaire/electric Range | AppliancePartsPros.com

Here is tha wiring diagram.
http://manuals.frigidaire.com/prodin.../316002706.pdf

I am assuming that the stove top runs OK and that the oven never comes ready.

If the above are true then the first thing to check is that both elements are working.
Could be just a burned out element.
Most units use both elements during preheat usually switching back and forth between them.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven not heating properly	chucktate	Oven Repair (including Ranges and Cooktops)	0	08-09-2010 04:41 PM
Gas oven not heating properly	wandanyb	Oven Repair (including Ranges and Cooktops)	2	03-17-2010 05:56 PM
Oven not heating properly	what41109	Oven Repair (including Ranges and Cooktops)	0	01-25-2010 06:00 PM
oven not heating properly	harry foy	Oven Repair (including Ranges and Cooktops)	1	12-16-2008 08:39 AM
Oven not heating properly	naholter	Oven Repair (including Ranges and Cooktops)	2	12-13-2007 08:05 AM

Oven not heating properly

Oven Repair (including Ranges and Cooktops)

We recently replaced the EOC board. Now the oven does not heat properly. It was working fine for about amonth