[Douglas Poole]

Is the clock (control board) difficult to replace??

[Joe / APP Team]

Originally Posted by Douglas Poole

Is the clock (control board) difficult to replace??

Douglas,

No, not really,

Here are your part numbers(you may want to consider a key pad as well).

and the instructions on the repalcement procedure.

Part number: AP5176341

Part number: AP2126499

To remove the backguard back panel:
1. Disconnect power from range.

2. Remove six screws and lift the panel off.


NOTE:

Screws may be removed using either a 1/4” nut
driver or an S1 square drive

To remove the electronic oven control:

1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Disconnect the wires and harness from the
control board.(make sure you label the wires/connectors).
4. Remove the four screws. (One from each
corner).

Reverse procedure and check for proper operation

[Douglas Poole]

Thanks for the quick reply and assistance!

[Joe / APP Team]

Originally Posted by Douglas Poole

Thanks for the quick reply and assistance!

Douglas,

Thanks for allowing us to assist you,

It was our pleasure.