[crazyman]

one top burner ignitor switch started arcing and clicker stayed on, unplugged and found one switch charred and two others stuck on. cut out bad ones and used the good one to turn on burners. Three burners worked ok but one had weak spark (not enough to ignite gas), tried switching wires on ignitor but nothing made sense, unplug one and two clickers wouldn't work or three wouldn't. Could a breakdown in the transformer or the ignitor module be fed back into the ignitor switches to cause this problem? Ordered ignitor switch assembly but received wrong part, looked the same on parts layout but hole was to small for knob shaft, will hold off on ordering anything until a reply is received. Still using stove using one switch to light three burners and fire stick to light the other. any help appreciated. Ben