|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » dACOR ERDE48 HINGE OR DOOR FRAM PROBLEM |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
01-24-2011, 06:20 AM
|
|||
|
|||
dACOR ERDE48 HINGE OR DOOR FRAM PROBLEM
Model Number: ERDE48 Brand: Dacor Age: 1 - 5 years
The large oven door on this model will not close tight, with no air gap to the oven. When fully opened next to the smaller oven door, it drops 1.5" more. The left, smaller door closes tight, but the right larger door, when closed has a 1/8-1/4" gap at the top, as evidenced by the light coming from the side when the oven light is turned on. Should I repalce the hinges, or the door frame? How difficult is it to replace either of these? Does it require the stove to be pulled out from the cabinet, or can all operations be performed with just the front exposed?
Thanks for your help Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Coverting a Dacor ERDE48 from ND to LP | mark.allen.ellingson | Oven Repair (including Ranges and Cooktops) | 5 | 01-08-2010 03:29 PM |
| Front Loader: How to reverse door swing / right hinge to left hinge | Three3walkers | Washer Repair | 3 | 05-31-2009 04:14 PM |
| Dacor/door hinge replacement | mwill5 | Oven Repair (including Ranges and Cooktops) | 0 | 12-13-2008 04:33 PM |
| Lower door hinge assembly problem | tulanh | Refrigerator & Freezer Repair | 3 | 06-12-2008 10:35 PM |
Linear Mode
