Oven Repair (including Ranges and Cooktops)

wyoming joe · #1 (**permalink**) 10-10-2007, 09:24 PM

Oven will not light, clicks twice but won't light. Replaced control panel still getting same error code E0 F0. What do I change next? Top burners and clock works.

richappy · #2 (**permalink**) 10-12-2007, 02:39 AM

I would replace your bake igniter if that's your failed area. Click on your model # to order.

wyoming joe · #3 (**permalink**) 10-15-2007, 09:06 AM

richappy,

I failed to mention in my first posting that not only does the oven not work but niether does the broiler. I think I need a part that is common to both the broiler and the oven. - Sorry I didn't get all the info out the first time. Could both igniters be bad at the same time?

wyoming joe

richappy · #4 (**permalink**) 10-15-2007, 09:54 AM

I would pull out your service sheet, located on the frame next to the bottom drawer, and see what the error codes mean.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
whirlpool electric wall oven problem	devdry	Oven Repair (including Ranges and Cooktops)	1	09-15-2007 10:30 PM
Whirlpool Elect Double Oven no power	lfein	Oven Repair (including Ranges and Cooktops)	1	09-12-2007 10:24 PM
whirlpool oven does not work	bob zaveri	Oven Repair (including Ranges and Cooktops)	1	08-30-2007 07:43 PM
Whirlpool oven won't light	tpreston@dc.rr.com	Oven Repair (including Ranges and Cooktops)	0	08-12-2007 12:10 PM
Whirlpool Oven Element Bad?	kstidham	Oven Repair (including Ranges and Cooktops)	1	08-02-2007 11:38 AM

Whirlpool Oven

Oven Repair (including Ranges and Cooktops)

Oven will not light, clicks twice but won't light. Replaced control panel still getting same error code E0 F0.