Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
ncdeals  
#1 Posted : Wednesday, December 22, 2010 7:13:40 AM(UTC)
Quote
ncdeals

Rank: Member

Groups: Registered
Joined: 12/22/2010(UTC)
Posts: 2

When turning on the front right (larger) solid burner element TO ANY TEMPERATURE SETTING, the burner comes on very high and I notice an odor. The right back (smaller) solid burner element appears to work correctly except sometimes the burner light comes on and may go off - it's "touchy". Since I have two solid burner cartridges and both are exhibiting this problem, I assume it's not the cartridge but something behind the control knob, but what part am I looking for? Based on the Internal Controls diagram, I suspect it could be either AP4291987 or AP4291988.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ncdeals  
#2 Posted : Wednesday, December 22, 2010 8:15:35 AM(UTC)
Quote
ncdeals

Rank: Member

Groups: Registered
Joined: 12/22/2010(UTC)
Posts: 2

After additional searching in this forum, I think I was looking at the wrong diagram. It would seem the part that needs to be replaced is the infinite switch AP4088188.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.