[finalfx]

Hello everyone,

I have a Kenmore range that recently has started displaying the F2-E0 error and have determined that it is likely the control board. I am capable of replacing the board but I have no idea what model my range is so I can buy a replacement board.

I have checked under the removable burners at the top, behind the range, and along the edges where the oven door opens. Any help is appreciated and I have linked to pics to help. Any help is appreciated

[ApplianceJunk]

Open the drawer and look along the sides of the frame. Also with the drawer open take a close look up along the very bottom edge of the oven door.

[denman]

If the sticker is missing.
Unplug the unit and rear cover to see if you can get the manufacture's/part number off the control board.
Then perhaps it can be cross referenced using this number.

[finalfx]

Thanks for all the help, I found a sticker with a mod# 880.598194P4 but can't seem to match this model number on any parts sites.

[ApplianceJunk]

Were did you happen to find it?

Is this a U.S.A model or maybe a Canadian model?

[finalfx]

I found it on the inner wall on the left hand side after opening the drawer. It is a Canadian model from Sears I believe.