Oven Repair (including Ranges and Cooktops)

brigham · #1 (**permalink**) 12-09-2010, 08:39 AM

My range (with controls in the front) has a bad switch that I need to replace. I've found the part (54A on the diagram) but I cannot figure out how to get to the underside of the control panel. I've seen answers for similar questions here, but the unit is different from mine. There are no screws on the side of the unit like there are on some others.

Thanks.

magician59 · #2 (**permalink**) 12-09-2010, 10:39 AM

Disconnect the power first. Here's a parts breakdown of the backguard/control panel. Remove the knob to expose the retaining nut. Replace the switch by removing one wire at a time, and transferring it to the new switch (or label the wires and take a clear digital picture of the old switch and wiring before beginning).
Replacement parts for FRIGIDAIRE FES367DCB Frigidaire/electric Range | AppliancePartsPros.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replace Jenn-air gas burner switch	mzjnk	Oven Repair (including Ranges and Cooktops)	0	11-07-2010 03:55 PM
replaced stove top burner and infinite switch but burner still does not work	rcaple	Oven Repair (including Ranges and Cooktops)	1	09-23-2010 05:34 PM
Need to replace top burner switch	brando	Oven Repair (including Ranges and Cooktops)	0	02-10-2009 06:20 PM
Replace burner switch on GE electric cooktop	mr2bob	Oven Repair (including Ranges and Cooktops)	1	01-28-2009 06:39 PM
how do I replace burner control switch GE JMP26G*H1	glennb100	Oven Repair (including Ranges and Cooktops)	0	07-11-2008 03:21 PM

How do I replace burner switch?

Oven Repair (including Ranges and Cooktops)

My range (with controls in the front) has a bad switch that I need to replace. I've found the part