|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » How to replace "faceplate graphics asm" or part # AP3205768 |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-02-2010, 06:04 AM
|
|||
|
|||
How to replace "faceplate graphics asm" or part # AP3205768
Model Number: JBP82SF1SS Brand: GE Age: 5 - 10 years
This weekend I am going to replace this faceplate for my GE stove part # 18 and I was wondering according to the diagram it only shows 2 screws holding the trim assy part #1 on to the stove, do I have to remove all the knob screws also, there seems to be 2 screws per knob, basically I would like a good explanation on how to remove all the parts so I can get to the screen, it looks easy but it never really is, if you know what I mean. Please assist. Thanks.
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bosch dryer stops, beeps, "Drying" and "End" lights on | endyem | Dryer Repair | 2 | 10-19-2012 04:46 PM |
| Kitchen Aide Ice Maker cause "snow" where ice should come out.Ice "Cubes" are crushed | lauriejb | Refrigerator & Freezer Repair | 0 | 05-29-2010 08:58 AM |
| oven "moaning" sound then faint "poof" sound; later, large "poof" popped door open | samej71 | Oven Repair (including Ranges and Cooktops) | 2 | 03-24-2010 07:05 AM |
| Problem with fitting "Newly Designed" part into an old Whirlpool dishwaser | eat | Dishwasher Repair | 0 | 03-10-2010 05:25 PM |
| How hard and what part for fixing "auto dry"cycle | pickeychickey | Refrigerator & Freezer Repair | 0 | 09-21-2009 08:46 AM |
Linear Mode
