Oven Repair (including Ranges and Cooktops)

Just George · #1 (**permalink**) 11-24-2010, 10:44 AM

Hi Guys and Gals,

I just purchased a replacement oven burner ignitor. The replacement unit came with bare wires and wire nuts. The original seems to have push in plugs at the end of the wires. Does anyone know if I simply cut and strip the wires and use the wire nuts to splice into the original plugs? Also, does it matter what wire goes where?

Thanks,
George

Just George · #2 (**permalink**) 11-24-2010, 02:46 PM

Hi everyone,
No need to respond to this issue. Since I posted I discovered that others had the same question. Followed their solutions and figured it out.

Thanks,
Just George

p.s. Have a Happy Thanksgiving

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tappan oven igniter issues	abullfrog	Oven Repair (including Ranges and Cooktops)	0	06-01-2010 10:59 AM
Igniter installation for Tappan Oven	almah1	Oven Repair (including Ranges and Cooktops)	5	03-29-2008 11:25 AM
Igniter installation for Tappan Oven	almah1	Oven Repair (including Ranges and Cooktops)	0	03-16-2008 12:06 AM
Tappan Gas Oven Igniter going bad? Amps?	John Fisher	Oven Repair (including Ranges and Cooktops)	1	01-24-2008 06:16 PM
Igniter installation for Tappan Oven	robbi6250	Oven Repair (including Ranges and Cooktops)	3	12-29-2007 01:31 PM

Tappan oven igniter installation

Oven Repair (including Ranges and Cooktops)

Hi Guys and Gals, I just purchased a replacement oven burner ignitor. The replacement unit came with bare wires and