Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Justina  
#1 Posted : Tuesday, October 28, 2008 1:16:10 PM(UTC)
Quote
Justina

Rank: Member

Groups: Registered
Joined: 10/28/2008(UTC)
Posts: 1

My Range displays an error "F2 EO stuck key"

After looking up the error message online it tells me to "replace touch pad or clock assembly (also called ERC) or try to unstick botton if you can. Shorted keypad--Replace Electronic Range Control/Clock."

Another site states I should replace the keypad (also called the touch pad or membrane switch. Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

For my model number, is the keypad incorporated into the control board, thus having me replace both items, or can I just replace the ERC alone?

Is replacing the ERC easy enough that I can do myself or would it be wise to call a technician? Apparently the (ERC) will cost me about $172.00, so I can just imagine what labor and technician house visit will cost in addition to the part...these aren't good economic times :confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Tuesday, October 28, 2008 1:29:40 PM(UTC)
Quote
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Microcomputer/control board AP3872569
Membrane switch AP3777757
You can check it your self if you have an ohm meter, if not call a Whirlpool certified tech to check it. I would check the ribbon connection first, if it's become corrodid or loose you could get an error code.

Nat
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.