Oven Repair (including Ranges and Cooktops)

justjim2 · #1 (**permalink**) 10-23-2008, 05:47 PM

When I press the control pad to turn on the bake cycle, it will not function. When I press the broiler pad button, the broiler works fine. When I press the pad for "clean" the broiler unit turns on, but the bake unit does not. My question is, "will the bake touch pad not function (make it's beep noise) if the bake element is burnt out?" The oven was purchased in January 2002 and has been used a lot.

Gene · #2 (**permalink**) 10-24-2008, 02:55 PM

Most likely the problem is a bad Bake pad. Unfortunately the membrane switch for this model is no longer available.

Gene.

justjim2 · #3 (**permalink**) 10-25-2008, 01:39 PM

Thanks Gene.
By a "bad bake pad" you mean the heating element, correct?

Gene · #4 (**permalink**) 10-27-2008, 08:11 PM

Well, lets start it over. What was shown on the display when you pushed the Bake button on the control panel? What happened to the Bake igniter at that time?

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bake element doesn't work	philrocks	Oven Repair (including Ranges and Cooktops)	1	12-21-2009 12:31 PM
bake element does not work	hectorsev	Oven Repair (including Ranges and Cooktops)	3	11-29-2009 06:38 AM
bake element does not work	hectorsev	Oven Repair (including Ranges and Cooktops)	1	11-29-2009 03:46 AM
Bake element doesn't work	philrocks	Oven Repair (including Ranges and Cooktops)	0	08-20-2009 04:54 PM
Oven bake element caught fire and now will not work	dmacker	Oven Repair (including Ranges and Cooktops)	2	04-05-2009 07:27 PM

Touch Pad-will it work if the Bake element is burnt out?

Oven Repair (including Ranges and Cooktops)

When I press the control pad to turn on the bake cycle, it will not function. When I press the