|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » No heat, just returns to clock |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: CPS130 Brand: Dacor Age: More than 10 years
Can't figure this one out, Dacor cps130 everything works in diagnostic mode, all coils heat, fan and convection work. When not in diagnostic mode, I choose any of the heat modes, and set temp,I hear a relay click, fan kicks on, and after a few seconds returns to clock, no heat. I even checked the high temp switch with the power off, it has continuity. I can't find a wire diagram. Any help or ideas would be greatly appreciated.
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
Most likely the problem is a bad Electronic Range Control (ERC).
- The part number for the ERC is AP4366175 Here you can find the wiring diagram. Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Frigidaire Gallery Stove - Pre-Heat/Bake Clock Issue | scotthay | Oven Repair (including Ranges and Cooktops) | 0 | 12-28-2009 04:21 PM |
| Oven/clock Control Panel is no longer lit but oven does heat. | jthomas@abrakadoodle.com | Oven Repair (including Ranges and Cooktops) | 1 | 12-05-2009 04:07 PM |
| New clock returns to 12:00 when top burner is turned on | swilk2 | Oven Repair (including Ranges and Cooktops) | 0 | 04-24-2009 10:44 AM |