Oven Repair (including Ranges and Cooktops)

richardjefferson · #1 (**permalink**) 10-03-2010, 08:45 PM

When oven is on broil or bake there is no heat at all. When the convection oven is activated it gets to a little over 100 degrees at best.

Also posible related is that the ignigor for the stove top will not fire unless the oven is on.

These problems seemed to have occured after removeing and replaceing the circuit breaker for the stove. Dont know if its realted. I have 240v going to the stove. im wondering if there is some type of fuse or breaker in the stove thats only allowing 120v rendering the ignightor and oven unworking.

Im not getting any error codes.

Any help or thoughts are appreciated.
Sincerley,
Rick

richardjefferson · #2 (**permalink**) 10-04-2010, 01:09 AM

It was a power problem, either polarity was reversed or there was not good contact at the circuit breaker. thanks for viewing this thread.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenmore Dual Fuel - OVEN NOT HEATING PROPERLY	chaznsc	Oven Repair (including Ranges and Cooktops)	2	05-25-2010 10:37 PM
Viking dual fuel range oven does not work	Ren10	Oven Repair (including Ranges and Cooktops)	0	04-22-2010 10:31 AM
Thermador 48" dual fuel range	sk2727	Oven Repair (including Ranges and Cooktops)	0	01-07-2010 08:50 PM
Kenmore Dual Fuel oven not working	Rose21	Oven Repair (including Ranges and Cooktops)	1	03-29-2009 11:15 AM
dual fuel range	Donny C	Oven Repair (including Ranges and Cooktops)	3	02-25-2009 05:27 PM

kenmore Dual Fuel Range - oven does not heat

Oven Repair (including Ranges and Cooktops)

When oven is on broil or bake there is no heat at all. When the convection oven is activated it