Oven Repair (including Ranges and Cooktops)

GLENNA CAGLE · #1 (**permalink**) 10-01-2008, 09:32 AM

When I hit the control on my oven control panel to raise the temp it automatically just goes down in temp even if i hit it to go up in temp. 350 is as high as it goes . It cooks fine at that temp but is all it will do on bake. If I put the oven on broil the temp will go where it is suppose to. I was told I needed a new control board which is almost $500. Is this what you think the problem is with the oven. The oven is 9 years old. Thank you for responding soon.

libertyappl · #2 (**permalink**) 10-01-2008, 09:37 AM

can you post your model numer. the number you have is a part number or something. you can find the model number on the frame of the unit after opening the drawer on the bottom.
Nat

GLENNA CAGLE · #3 (**permalink**) 10-01-2008, 09:45 AM

Quote:

Originally Posted by libertyappl

can you post your model numer. the number you have is a part number or something. you can find the model number on the frame of the unit after opening the drawer on the bottom.
Nat

I HAVE MODEL #886380SP086 ( MAYBE THE FIVE I GAVE YOU WAS ACTUALLY A S. THE O COULD POSSIBLY BE ZERO OR VICE VERSA/ THE SERIAL NUMBER IS x30401075.

I WILL HAVE TO CHECK AT LUNCH IF THIS MODEL # STILL DOES NOT WORK FOR YOU.

libertyappl · #4 (**permalink**) 10-01-2008, 09:51 AM

It should look something like this.... RF386PXEQ

GLENNA CAGLE · #5 (**permalink**) 10-01-2008, 12:49 PM

Whirlpool Model # RBS305PD86. Believe this will be correct.

GLENNA CAGLE · #6 (**permalink**) 10-01-2008, 01:15 PM

model # is RBS305PD86

libertyappl · #7 (**permalink**) 10-01-2008, 01:55 PM

Glenna,
The control board for your oven is only about $275 if you order it from this site. The part # is AP3009794. And you Could put it in yourself and save lots of $$ which is a lot cheaper than a new one!!
Nat

GLENNA CAGLE · #8 (**permalink**) 10-01-2008, 02:08 PM

Do You Think That That Is What The Problem Is With The Oven And I Have Been Told The Right Thing?

libertyappl · #9 (**permalink**) 10-01-2008, 03:50 PM

Glenna
that is definately what it sounds like!
Nat

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replace control panel or just control panel housing?	Max Strano	Dishwasher Repair	1	08-26-2008 07:02 PM
replacing oven control panel	brad	Oven Repair (including Ranges and Cooktops)	2	07-14-2008 03:55 PM
oven control panel indicates LOCKED	TrishK	Oven Repair (including Ranges and Cooktops)	1	05-19-2008 02:05 PM
Need electronic control panel for wall oven	tankersm	Oven Repair (including Ranges and Cooktops)	2	01-01-2008 11:05 AM
Control Panel Assembly for GE Oven	cbarker79	Oven Repair (including Ranges and Cooktops)	0	12-29-2007 06:26 AM