Oven Repair (including Ranges and Cooktops)

jkbrunda · #1 (**permalink**) 09-21-2008, 12:03 PM

I baked in the oven two days ago. When the timer went off (I use the microwave timer) I noticed that the food was cooked, but the oven was off (no clock, no error codes, nothing.) I turned the 220 breaker off and back on. This brought everything back except the oven. So the stovetop and convection fan work fine but the oven will not heat. It does not display any error codes. After reading some posts on this forum, I decided to try the cleaning cycle and am waiting for that to finish, but the door still feels cold.

Any ideas?

Justin

fyxer · #2 (**permalink**) 09-21-2008, 07:47 PM

bake element might be burnt out, sometimes this happen during a self cleaning session.

granville - FriendFeed

Gene · #3 (**permalink**) 09-22-2008, 04:34 PM

If both Bake and Broil are not heating then, most likely, the problem is a bad control board (aka clock).

- The part number for the clock is AP3764682

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amana convection not heating	Mvantilburg	Oven Repair (including Ranges and Cooktops)	30	09-02-2009 07:34 PM
Stovetop and oven not working	Roughbreak	Oven Repair (including Ranges and Cooktops)	0	08-12-2008 05:49 PM
Convection Oven not heating well	russ hibbeler	Oven Repair (including Ranges and Cooktops)	3	12-11-2007 12:17 PM
Bosch Convection Oven Heating Element	rochelleferris	Oven Repair (including Ranges and Cooktops)	0	10-25-2007 04:10 PM
Convection oven not heating (microwave working fine)	rm625	Microwave Repair	0	08-13-2007 04:41 PM

Oven Not Heating, Stovetop & Convection are Fine

Oven Repair (including Ranges and Cooktops)

I baked in the oven two days ago. When the timer went off (I use the microwave timer) I noticed