Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
nahallaco  
#1 Posted : Monday, August 16, 2010 12:30:20 PM(UTC)
Quote
nahallaco

Rank: Member

Groups: Registered
Joined: 8/16/2010(UTC)
Posts: 2

None of the four burners on my GE Profile range will ignite. They work fine when lit by an external flame so they are receiving gas. Saw both ignitors and spark modules on your web site and wasn't sure which one would be the right replacement.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, August 16, 2010 3:15:25 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does any of the burners click and/or spark when any of the knobs turned ON?

Gene.
nahallaco  
#3 Posted : Monday, August 16, 2010 6:04:59 PM(UTC)
Quote
nahallaco

Rank: Member

Groups: Registered
Joined: 8/16/2010(UTC)
Posts: 2

No clicks or sparks from any of them, all you hear is gas.
Gene  
#4 Posted : Tuesday, August 17, 2010 2:16:38 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad spark module, but there is a small chance for the ignition switch harness to be bad as well. I would order and replace both of them (they are not expensive). If one of them is still good you can return it later.

- The spark module Part number: AP3778816
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.