[smithmr]

Maytag Double Oven: The top ovens bake element has stopped working, I assume the element is shot, however after removing the element and checking with ohm meter it has continuity. So I probed all visible thermostat and connections and found all to read good. I did notice that one of the plugs on the circuit board was not fully seated, so I hoped this might be the culprit. Not, of course LOL. Anyway as I powered the oven up to test this I noticed that on the disply it showed H3 to the left of the clock. I assume this is a trouble code, and it only displays upon resetting power?? I have searched for this online however have not found an answer yet. Any help on getting to the bottom of the problem will be greatly appreciated.
Mark

[smithmr]

Ok after looking at this again, i realize the code at startup is H3 131, so that means that some of the other information that I found is relevent, sounds like the board is bad. Now to find a replacement.

[Gene]

Sounds like the problem is a bad control board. You have to order the new overlay because it is glued on.

- The control board Part number: AP4358958

- The overlay Part number: AP4097924

Here is the Service manual.

Here are the breakdown diagrams and Replacement parts for MAYTAG MER6755AAQ Freestanding - Double Oven - Electric | AppliancePartsPros.com

Gene.