|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » replacement control board doesn't work properly |
| By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: JVM1650 Brand: GE Age: 5 - 10 years
I replaced a burnt out light bulb with the microwave (GE JVM1650) plugged in and as a result lost function of the bottom range lights. I ordered a replacement smart board RAOTR7T-01 (WB27X10382)and installed it. Now the bottom lights work but the microwave interior vent and lights come on when the door is closed and the microwave won't heat....please help. I don't want to be stuck with a 100 dollar useless part and a microwave that doesn't function.
|
|
||||
|
Check the upper door switch, you may have bumped it during the repair. Remove the control panel and look at the switch bracket. There are 3 switches, top middle bottom. Make sure the door latch is pushing the button on the switch.
__________________
Who wants a chance to win $10,000 a week for the next 17 weeks? How about $250,000 if you have the most points after 17 weeks. The best fantasy football site around, hosted by Terry Bradshaw!!!!!!!!!!!!!!!!!!!! Sign up here to give abadfish66@cox.net credit for referring you to us. You can also just go to PayTheFan.com and enter "2179" as a Referral Code when you sign up. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Replacement Electronic Control Board | vbaroni | Washer Repair | 0 | 05-27-2008 11:14 AM |
| Washer wont work properly. | sriram | Washer Repair | 1 | 04-16-2008 10:52 PM |
| Kenmore Elite Control Board Replacement | TAEHARVEY | Washer Repair | 1 | 01-06-2008 04:32 PM |
| Maytag control board replacement | catsun54 | Refrigerator & Freezer Repair | 1 | 09-29-2007 02:55 AM |
| Circuit board replacement | tobrouhard | Refrigerator & Freezer Repair | 5 | 08-16-2007 05:24 AM |