Microwave Repair

SheriO · #1 (**permalink**) 05-05-2010, 08:50 AM

Good Morning!

My microwave is not heating anymore. It appears to work normally, it just won't heat up.

And no, I didn't put a fork or any metal in there.

Thanks!

Gene · #2 (**permalink**) 05-05-2010, 04:01 PM

This microwave made overseas and all technical information has been kept by Sears as a top secret. All parts are sold by Sears only as well.

Gene.

tvtech · #3 (**permalink**) 05-14-2010, 12:11 PM

you can do some testing..
1. check 120 volt to primary
2. if ok check large cap and large diode
3. if ok replace magnetron.. (verify that you have 10 amp or so with clamp on amp meter to the magentron)
4 is 120 primary is missing look into control board area for loose connections. and such may need new control board

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenmore microwave	mark chavalas	Microwave Repair	0	03-29-2010 01:22 PM
Kenmore Microwave Just Went Out	jwmitch	Microwave Repair	0	06-23-2009 01:38 PM
Kenmore microwave not working	bwt66	Microwave Repair	0	04-13-2009 10:34 AM
Kenmore Microwave	joverwy	Microwave Repair	11	08-26-2008 07:50 AM
Kenmore/LG microwave intermittent use	healeypd	Microwave Repair	3	02-04-2008 05:59 PM

Kenmore Microwave

Microwave Repair

Good Morning! My microwave is not heating anymore. It appears to work normally, it just won't heat up. And no,