[Tim]

Door handle broke at the upper screw holder and I can't figure how to get at the lower screw to replace it. Upper screw is in plain sight but lower screw is in the door.

[Admin / APP Team]

Hi Tim,

Check out this door frame diagram, specifically number 1805. It clips on to the door frame. Remove it using a dull table knife or something similar (be careful not to scratch or break anything). You will then have access to the bottom screw.

Let us know how it works out.

[mark w]

How do you go about replacing the handle on a Roper microwave model MH14XMB-O

[Admin / APP Team]

Mark, please double check that model number. It doesn't come up at all. I've tried multiple variations (O=0, 1=I, etc). Post it here and I'll take a look.

[Perkis]

Does anyone know how to replace the door handle on a Whirlpool microwave? There are 3 screws on the side but they don't loosen anything?

[Admin / APP Team]

Perkis,

You'd have to remove the inner frame (#2 on this diagram), just like I described it for Tim at the beginning of this thread.

[Perkis]

On the whilrpool there are tabs inside that go all around, is there some easy way of removing this other than with a dull knife. This does not work.

[Admin / APP Team]

Not that I know of. The plastic inner frame is fragile, but still pretty flexible.

[oldmarathoner]

I need to replace the handle on this Microwave. I cannot seem to find any way to do it. Help!!

[211011255]

I have model Kitchen Aid KHHS179LSS and the handle broke off this morning. The plastice where the screws were screwed into broke. I have found the part on your site, but need help in replacing it. Do I only have to take a back frame off and then I will have access to the screws? Please help. Thanks!!!!