GE Over the Range Microwave 20 Amp fuse keeps blowing up
I tested all the door switches and all work properly. The middle switch (Monitor Interlock Switch), which connects to the transformer, works after removing it from the microwave completely. The issue is with the cable that connects to the switch. The cable that connects to the switch has constant continuity (when off the switch). If I connect the plug to the switch and press the button.... there is constant continuity on the plug. The switch works, but the cables do not reflect the opening and closing of the switch.
The cables on the other switches reflect the change, when I press the switch. If the switch is good, but the wires are not reflecting the condition of the switch.... What could be the issue?