|Register | FAQ's | New Posts | Today's Posts | Extras|
Ge profile OTR not working
Model Number: PVM1870SM3SS Brand: GE Age: 1 - 5 years
I have a GE over the range microwave Model # PVM1870SM3SS that is 2 years old.
The display is dark, no interior light or any signs of life.
I've checked the main fuse and HV trans fuse both are good. I have 120v in and out of both sides.
I have 120v in and out of (I believe the bottom TCO or at least the one behind the control panel)
Hood tco is open (I searched the part number and it returned results that that one is normally open) I also tried eliminating this tco and jumped the wires and it did not change anything.
I have 120v going the the smart board.
I followed the troubleshooting guide that was tucked behind the control panel and it said to replace the PCB (smart board).
So I purchased a new smart board and its still dead. No indication of life at all.
I checked for voltage again at the spots above. Also checked the 3 door switches and all check good.
Ads By Google
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|GE Profile motor not working||RTR||Dishwasher Repair||3||07-27-2012 11:08 AM|
|GE Profile TFS28PB message center not working, freezer light not working||prakoski||Refrigerator & Freezer Repair||0||07-26-2012 05:13 AM|
|GE profile not working||vmoore||Microwave Repair||1||07-05-2011 05:41 PM|
|GE profile condensor fan not working||dcampbell||Refrigerator & Freezer Repair||8||04-25-2009 08:53 PM|
|GE Profile not working||chonnie_t||Refrigerator & Freezer Repair||2||03-12-2009 05:30 AM|