Rank: Member
Groups: Registered
Joined: 2/21/2013(UTC) Posts: 3
|
I have a GE microwave / oven combo and I recently changed the thermal switch (GE part #WB27X10166) for the magnetron cooling fan. I checked all other thermal switches with ohm meter and they are ok. I re established power to the set and the mag cooling fan stays on and will not shut off. I did more searching and spoke with the customer support who stated I need to unplug the power for 1 hour and allow the microwave to reset. I completed this process and it did not correct the mag cooling fan issue. I also placed a cup of cold water at tested the microwave heating condition, it passed. All functions on the keypads work properly I am hesitant to think its a board issue. Any help is greatly appreciated. Doing these repairs on a shoe string budget. In researching this issue i found that you can make the repairs yourself and save alot of money.....:)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close