|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Magnetron cooling fan won't start |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-20-2013, 07:03 PM
|
|||
|
|||
Magnetron cooling fan won't start
Model Number: GH6208XRS 0 Brand: Whirlpool Age: 1 - 5 years
I replaced the microcomputer circuit board associated with an F7 error code it had a burned out diode or relay circuit. I have since replaced the inverter board as well not sure I needed too. Plugged in the microwave and it heats like a charm without the error code, but the magnetron cooling fan doesn't come on to keep it cool. Where do I go next? If it is something unreasonable I will pull the parts and send them back. The unit was used up to 3 years before the problem and hasn't been used in about 1 year. I would rather fix it but will not put more than it's worth to replace it with something new.
Thanks, Rick Entrekin Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
02-21-2013, 04:35 PM
|
||||
|
||||
|
Hi.
Do you have the pat number of the board you replaced? Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
02-22-2013, 11:41 AM
|
||||
|
||||
|
Hi.
Check if there is 120VAC at the motor plug. If yes - replace the motor, if not - replace the relay board again. Post the results. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LG Magnetron | Peja | Microwave Repair | 0 | 09-26-2011 09:43 AM |
| replaced start relay still not cooling | ugottacit | Refrigerator & Freezer Repair | 7 | 01-18-2011 12:09 PM |
| Maytag Refrigerator not cooling or freezing, makes buzzing on start up. | ghartman21 | Refrigerator & Freezer Repair | 1 | 01-01-2011 07:46 AM |
| Wirlpool Micorwave blows fuse when I press start magnetron or transformer | wetpinkpants | Oven Repair (including Ranges and Cooktops) | 1 | 10-03-2010 10:19 PM |
| Reefer buzzing prior to start of cooling fan | peanut | Refrigerator & Freezer Repair | 0 | 12-29-2007 05:36 AM |
Linear Mode
