Microwave Repair

remwms · #1 (**permalink**) 11-09-2012, 09:18 AM

The selector knob on my microwave justs spins but will not change the digital indicator. You cannot select any of the options. There are a number of different electronic boards inside and I don't know what part I need to fix this.

Thanks,
Ron

Simon / APP Team · #2 (**permalink**) 11-09-2012, 05:37 PM

Hi.

Most likely it's a Key PCB Part number: WB27X10709

You can always return it back even if it's been installed.

Post the results.

Simon.

remwms · #3 (**permalink**) 11-12-2012, 03:01 PM

Would you happen to know how hard it would be for me to relace the Key PCB myself.Would I have to take the microwave off the wall before getting into it or can I get into it from the front?

Simon / APP Team · #4 (**permalink**) 11-13-2012, 10:48 AM

Hi.

Most likely you would have to remove the m/w and take the cover off. You will need basic skills and tools to do the repair. just make sure the wires goes back correctly.

Simon.

Simon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
replace bad microwave in Kenmore model 790.47853403 microwave/wall oven combo unit?	Wildt	Microwave Repair	2	02-19-2013 06:55 AM
GE Profile Microwave Not Heating on Microwave or Convection Mode	stampede	Microwave Repair	1	11-09-2012 04:45 PM
Microwave Wall Oven combo - Microwave repair	Alexismyboy	Microwave Repair	0	09-15-2012 09:39 AM
microwave/convection oven blows fuse when trying to microwave	christop	Microwave Repair	0	05-01-2009 06:40 PM
Need Microwave knobs for Gaffers/Sattler Combo Range/Microwave	afleer	Oven Repair (including Ranges and Cooktops)	3	11-17-2008 04:46 PM