Microwave Repair

PoggiPJ · #1 (**permalink**) 06-28-2009, 07:28 PM

The turntable makes a grinding sound, seems to struggle, but will not turn. Turning the coupler manually feels smooth. I can find 2 different motors for this unit- a drive motor and a stirrir motor. They are part numbers WB26X10037 and WB26X10038. Can you suggest which is the correct motor?

Gene · #2 (**permalink**) 06-28-2009, 07:56 PM

The turntable motor is shown as #43 on the diagram.

- The APP part number for the turntable motor is AP2024962

Gene.

PoggiPJ · #3 (**permalink**) 06-29-2009, 07:08 AM

Gene, thank you - I see in the part description it says, that I may have a D, or a square shaped shaft. I guess I better remove the old motor before and view the shaft before I order?

Gene · #4 (**permalink**) 06-29-2009, 10:57 AM

Yes, you are right.

Gene.

PoggiPJ · #5 (**permalink**) 06-30-2009, 10:54 AM

Quote:

Originally Posted by Gene

Yes, you are right.

Gene.

It was the "D" shaft - part on order. Thanks!

Gene · #6 (**permalink**) 06-30-2009, 06:09 PM

You are welcome. Keep us posted.

Gene.

PoggiPJ · #7 (**permalink**) 07-02-2009, 09:44 PM

Great news. The part arrived within 24 hours. within 5 minutes, i had it installed and operating flawlessly

Gene · #8 (**permalink**) 07-02-2009, 10:37 PM

Glad to hear it. Thank you for feed back.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stirrer motor constantly running	dsrdon	Microwave Repair	1	01-25-2010 06:06 PM
GE Spacemaker XL Stirrer Motor replacement	Ann Futrell	Microwave Repair	0	07-11-2009 06:11 AM
stirrer motor	cyganow	Microwave Repair	0	05-20-2009 04:49 PM
How to replace turntable Motor	pegsue62	Microwave Repair	0	01-10-2009 12:35 PM
GE microwave turntable motor	verndewitt	Microwave Repair	1	10-20-2008 02:51 PM

Turntable Motor (drive vs. stirrer)

Microwave Repair

The turntable makes a grinding sound, seems to struggle, but will not turn. Turning the coupler manually feels smooth. I