Microwave Repair

dgulbin@optonline.net · #1 (**permalink**) 10-08-2007, 09:08 AM

My above the stove light socket burned up. I replaced the unit but it will not light up the new lights. Is there any thing I can do further. I do have power to the new socket and the other socket.

MicrowaveDisplaycom · #2 (**permalink**) 10-13-2007, 02:29 AM

This is a problem with the control panel assembly.

This is most often caused by the filaments shorting when the bulb blows, or by not disconnecting the microwave from the power line when removing or installing a bulb.

Edited by Admin. Reason: Advertising is not permitted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nothing Happens, All Lights flash	Survivor	Washer Repair	5	06-23-2008 07:10 PM
Lights on, convection does not work	BrightRhino	Oven Repair (including Ranges and Cooktops)	1	12-13-2007 08:44 PM
Lights on, but no one's home!	kitchen aid	Refrigerator & Freezer Repair	10	10-01-2007 12:13 PM
Working, but no lights	geckomon	Refrigerator & Freezer Repair	2	09-11-2007 08:16 AM
Underneath Lights have no power	Mike Kreitzer	Microwave Repair	1	08-10-2007 09:01 PM

Lights do not turn on

Microwave Repair

My above the stove light socket burned up. I replaced the unit but it will not light up the new