| Register | FAQ's | New Posts | Today's Posts | Extras |
| » whsydddy9 |
| View Profile: whsydddy9 | |||||
|
|||||
|
the 2 wire from the Ac to the Furnace should be wired on the Y & C terminals - and PLEASE :eek: DISCONNECT THE POWER B4 WORKING! |
|
Yellow wire should go to - Y Green wire should go to - G Red wire should go to - R White wire should go to - W Then there should be a jumper wire between RC (cool) & RH (heat) |
|
if the unit is only a year old it should be under warranty... |
|
if you have the right voltage & the fan runs but not the compressor, maybe a wire is burnt off or you need a capacitor OR the compressor is bad. an 18,000 btu may have a 35/5 mfd capacitor on it so... |
|
The condenser fan motor start windings are bad caused by a dirty condenser. When it is as hot as it has been here in Kansas, we tell customers to change your furnace filters AT LEAST MONTHLY &... |
|
Try this link to UTube - YouTube - Washing Machine Lid Switch Replacement (part #3949247) (http://www.youtube.com/watch?v=MFsvLiuTniU) |
| Forum Info | Contact Info | |
|
Join Date: 10-18-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|