Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » weidnerr

View Profile: weidnerr
weidnerr is on a distinguished road
weidnerr weidnerr is offline
Junior Member
 
Last Activity: 05-21-2017 12:04 PM 

Clothes are too wet after final spin - Transmission Shaft free play
Transmission shaft has at least half inch or more free play up and down
Clothes are too wet after final spin - Hole in bearing kit dust cover
Pulled the cover off the large pulley. There is a round hole in it about the size of the snap ring. All the pieces look fine and the bearing is spinning freely with no noises. What could have caused...
Clothes are too wet after final spin - Hole in bearing kit dust cover
Bearing and cam parts all still look good. Bearing is spinning free with no noise. Only one washer. Wondering why the shaft dropped and spun a hole in the dust cover? The hole is the diameter of the...
Clothes are too wet after final spin - Hole in bearing kit dust cover
There is a round hole about the size of the snap ring straight through the dust cover. I wanted to add a pic but don't have a web link. Something has caused the shaft to drop I guess?
Clothes are too wet after final spin - Big pulley on the bottom spinning free in both directions
MAV3758aww

I turn the big transmission pulley on the bottom and the agitator is spinning freely in both direction with the belt off. Should there be resistance in one direction. At first glance I...
Clothes are too wet after final spin - Big pulley on the bottom spinning free in both directions
Thank you very much PNWDrew
Clothes are too wet after final spin - Big pulley on the bottom spinning free in both directions
Does this model have a clutch?
Forum Info Contact Info
Join Date: 05-10-2017
Posts
Total Posts: 9 (0.12 posts per day)
Last Post:
Clothes are too wet after final spin
05-11-2017 09:46 AM
Find all posts by weidnerr
Find all threads started by weidnerr
Referrals: 0
weidnerr has no contact information.
Additional Information Group Memberships
N/A
weidnerr is not a member of any public groups


All times are GMT -7. The time now is 09:41 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17