| Register | FAQ's | New Posts | Today's Posts | Extras |
| » weesel72 |
| View Profile: weesel72 | |||||
|
|||||
|
That was my thought as well. Was just hoping to get the resistance spec to be 100% certain...that's one expensive part for a cheap dishwasher! Might be better off just getting a new one! Thanks for... |
|
The circulation pump has the proper voltage, no blockage, so i need to know how to ohm it and what the ohms should be before i call it bad and replace it. Thank you! |
|
What are the ohms supposed to be on the circulation pump on a Frigidaire dishwasher? I have the proper voltage, no blockage, but want to know if the circulation pump motor is bad before replacing |
|
Well, everything just started "working" fine for a couple of days, now, the broiler burner is working fine. The bake burner ignites, igniter clicks for for 3 to 5 seconds with the flame, then goes... |
|
Sorry about the broiler part. I did clean up the connections when i took the burner apart to widen the 8 holes. All connection are good and clean? |
|
But the broiler burner is doing the same? What are the chances both burners went bad? Almost never use the broiler function? Thanks again! |
|
I removed the burner, 8 holes, drilled them out, did not fix problem. I have model # sf362lxty2 The burner will ignite, stay lit for 3to5 seconds then goes out, same with the broiler. I omed out the... |
| Forum Info | Contact Info | |
|
Join Date: 05-14-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|