| Register | FAQ's | New Posts | Today's Posts | Extras |
| » webhale |
| View Profile: webhale | |||||
|
|||||
|
Gene, I did the manual start procedure, but the Ice maker did not run. |
|
Gene, I assume that I need to replace the ice maker unit on a KSBS25INBL00 Kitchenaid base on the conclusions above. I have 120V power through points L & N, but the jumper in T & H did not produce... |
|
Hi Gene, Just to let you know that I finally got time to investigate the ice maker drive system. I found the shaft stuck in the coupling and spring was there. So I think it was rust from no use for... |
|
Gene, I think the spring or the plunger is either missing or broken. I will remove the 1/4" hex screws to investigate further, later. Thanks, John Hale |
|
Thanks for your response Gene, Coupling #25 is there and it rotates. #16 is also there, but does not rotate. It seems that the two couplings are not connected. The bin is all the way down on its... |
|
Kitchen Aid Superba Refigerator mod# KSBS25INBL00. The ice will not dispense in cubes nor crush. The motor turns but in seems like the coupling is not long enough to catch the auger. Any ideas on... |
| Forum Info | Contact Info | |
|
Join Date: 04-26-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|