 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » wbailey20 |
| View Profile: wbailey20 | |||||
|
|||||
Door lock light drops out mins into cycleI ordered the motor control from you all. Installed it tonight. It did pretty much the same thing. I tried the normal cycle and it started okay with a 48 min timer, but when it got to 36 min the lock... |
|
Door lock light drops out mins into cycle I pulled the lock switch out and reinstalled it. Last night I couldn't get it to start. I unplugged the washer and left it uplugged until tonight. I plugged back in and hit start, it ran all the way... |
|
Door lock light drops out mins into cycle - continuity and check wbailey20 - Thanks for the reply, I removed the lock and contiuity was good. When I place it back in; when I start the cycle the door lock and wash lights light and after a few seconds the rinse and... |
|
Door lock light drops out mins into cycle - Door lock light drops out mins into cycle This is the repair that goes in circles. I tried 2 new main control boards and neither of them worked. Frutrated this morning I put the old original control board back in and all of a sudden it... |
|
Control board change - Control board change Ok I sent the replacement board back and had another shipped in. This one only beeps and shows an error code E90 which isn't in the trouble shooting list. No other lights - nothing. This should be... |
|
Control board change - Control board change I recently changed out the control board and got the washer working but, the cycle selctor lights all flash at the same time and the cancel button has to be pushed to start it. We only know what... |
| Forum Info | Contact Info | |
|
Join Date: 11-11-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
