| Register | FAQ's | New Posts | Today's Posts | Extras |
| » vaughng |
| View Profile: vaughng | |||||
|
|||||
|
thanks again Denman, the oven is still set to factory, guess up to my better half to bake a cake to see if the temp is set according to the baking instructions, if not I will manually set... |
|
yep, you are correct, I took the clock apart and found a small burnt spot, one of the pins solder was melted away, I decided what have a got to loose, I soldered the pin back to the board and both... |
|
thanks for the reply Denman, I will pull the Clock control off and see if there are any burnt wires, I hope it is just the Overlay that is messing up, and if it is the Range Clock, than I will... |
|
let me add to my post, I found these solutions on post below The part number for the clock is AP3561834... |
|
My baking element shorted out, order a new one from your site, replaced it, now both the baking and broil elements will not come on, I do hear the relay kicking on when trying to start either one. ... |
| Forum Info | Contact Info | |
|
Join Date: 12-06-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|