 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » tresor |
| View Profile: tresor | |||||
|
|||||
slow spinhi Eric, Once again many many thanks for all your insightful info. We finally got it to work properly! We replaced the clutch and then after moving the machine back and forth to it's cabinet, the... |
|
slow spin We seem to have successfully installed the new clutch BUT now we reassembled all and did a test run with clothes in the machine. When it filled with water, it seemed normal, then when it began to... |
|
slow spin We are installing the new clutch. The old clutch has 6 black pads all around and the new one has only 3 whit pads. Is this ok? Seems like the new pads don't slip, but just seems odd. Any info is... |
|
slow spin hi Eric, Thank you for your response, it is exactly the type of info we were looking for. Can you also tell me what to look for on the clutch when we check it? We are planning to do this work on... |
|
slow spin hi Gene, We do not have a spanner wrench, already have it on order. We'll check the drive block once it arrives. |
|
slow spin hi Gene, We do not have a spanner wrench and were a bit cautious and concerned about trying to use the hammer. The wrench is on order and will arrive in a few days. We did try to spin the agitator by... |
| Forum Info | Contact Info | |
|
Join Date: 01-21-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
