 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » threeputt |
| View Profile: threeputt | |||||
|
|||||
Kenmore upper spray arm - Kenmore upper spray armI have a Kenmore dishwasher. Every time we run the wash, the upper spray arm falls off. I can push it back on, but every time it runs a cycle, the arm falls off. Thanks for any help. |
|
Maytag oven will not turn on - Kenmore upper spray arm Thanks again. I cannot afford to buy that part now:eek: . I only give a little over $500 for the oven:) so paying that much for one part would not be good:mad: . I will just buy a new oven and wait... |
|
Maytag oven will not turn on - Kenmore upper spray arm I know you are getting tired of me asking questions but I have one more. Is threre a way to test the control board to be 100% that is the problem? I know that is a longshot but thought I would ask... |
|
Maytag oven will not turn on - Kenmore upper spray arm I would buy the part but how can I guarantee it will not happen again? I know from working on computers for 15 years when board goes out there is usually something that causes it like a defective... |
|
Maytag oven will not turn on - Kenmore upper spray arm Same thing Simon. I can set it to say 300f and just wait and it shows the bake light blinking and no heat from oven. It used to go to preheat but now stays on what you set it on and again the bake... |
|
Maytag oven will not turn on - Kenmore upper spray arm Thanks Simon. I think what you explained is what mine is doing. When I press bake then the temp I want and punch bake again it should go to preheat. It stays on the temperature I programmed it and... |
| Forum Info | Contact Info | |
|
Join Date: 12-10-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
