 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » teb02 |
| View Profile: teb02 | |||||
|
|||||
GE overload/relay - GE overload/relayI replaced the board on this refrigerator because the condenser fan quit. The fan worked, but the overload burned out. The original overload/relay is one piece with a capacitor that plugs in. The... |
|
Dispenser control problem - GE overload/relay Hey Simon, Installed the new touch pad on Saturday and it worked like a charm. Thanks for the help. Tommy |
|
Dispenser control problem - Dispenser control problem The dispenser will not switch from water to ice. The refrigerator temp (+) up also will not work. When the ice, water, or temp + buttons are pressed the power, filter replace, lock out and light on... |
|
Dryer with no heat - Dispenser control problem There is 240 to the terminal. I replaced the control board, I did not replace the touch pad or user interface. I will check the voltage as you suggested. Thanks |
|
Intermittent problem - Intermittent problem The microwave runs with no heat. Diagnostic guide said to test line to noise suppressor. It was over 8 amps which said to check the magnetron and high voltage. The mag test okay with no apparent tube... |
| Forum Info | Contact Info | |
|
Join Date: 03-07-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
