 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » strictor |
| View Profile: strictor | |||||
|
|||||
Kenmore Dual Burner Indicator Light Always OnSo I do have an indicator light for each burner and also the warmer and even the "Element On" light. There is a total of 6 lights. The on that is on is the dual burner light which is dedicated to... |
|
Kenmore Dual Burner Indicator Light Always On So I replaced the infinite switch and the indicator light stays on. What else can it be? Can it be one of the other switches? |
|
Kenmore Dual Burner Indicator Light Always On Ok. So that didn't work the light stays on. The switch appears to be good. |
|
Kenmore Dual Burner Indicator Light Always On So there is no wire that goes directly from the indicator light to the switch. The wires from the indicator light don't directly terminate to the infinite switch. |
|
Kenmore Dual Burner Indicator Light Always On I will try that. I have one question though. This is the dual burner element. Isn't the switch shown above the single element switch. It has the smaller burner are and also the larger area for... |
|
Kenmore Dual Burner Indicator Light Always On Serial: VF92224417 The F may be a P, the sticker isn't clear. |
|
Kenmore Dual Burner Indicator Light Always On It is the heat on light, not the hot surface. Model: 790.95372801. Thanks. |
| Forum Info | Contact Info | |
|
Join Date: 11-14-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
