 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » StaTiK |
| View Profile: StaTiK | |||||
|
|||||
Melted Wiring on electric dryer - Melted Wiring on electric dryerHello, and thanks for taking the time to read this. :) My electric dryer recently stopped heating. It still powers on and cycles but there is no heat. I unplugged it and started to diagnose and... |
|
Frigidaire won't high-speed spin - Melted Wiring on electric dryer I've already replaced this part. This was the first item I replaced, and when it didn't work I tried the door latch and then the other control board. I've tried all three new parts, as well as every... |
|
Frigidaire won't high-speed spin - Melted Wiring on electric dryer Sorry about that! Pin 1-2: 5.5ohm Pin 1-3: 5.5ohm Pin 2-3: 5.5ohm Any recommendations? |
|
Frigidaire won't high-speed spin - Melted Wiring on electric dryer As always, I am very thankful for you taking the time to help diagnose my problem Gene. I apologize if I was unclear but I did this before my first post, but I will gladly do it again since I did... |
|
Frigidaire won't high-speed spin - Melted Wiring on electric dryer Thank you for the reply Gene. I've used spin speeds "High" and "Med" but neither work reliably using Heavy, Normal, or Perm Press settings. Delicate and Handwash still work fine. Rinse/Spin and... |
|
Frigidaire won't high-speed spin - Melted Wiring on electric dryer first, thank you for the help provided to date. Update: well the repair parts worked, kind of. The door latch seemed to have no effect, but replacing the control board (FRIGIDAIRE 137005000 Control... |
|
Frigidaire won't high-speed spin - Frigidaire won't high-speed spin Hello, I have a front-loading Frigidaire FTFB4000FS1 which was purchased around 2007. It worked well for about 2 years, then went into storage for about 2 years while living in an apartment, and now... |
| Forum Info | Contact Info | |
|
Join Date: 06-26-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
