| Register | FAQ's | New Posts | Today's Posts | Extras |
| » SpartanRookie |
| View Profile: SpartanRookie | |||||
|
|||||
|
I found the thermister today, and also took apart the damper door cover, and saw the door open/close when I adjusted the dial temp settings. It seems that the door is working properly, but it wants... |
|
I am not having any luck finding any references to thermistors on the fridge side of dss25pfmd ge fridge. anybody help? |
|
Ok, I will hunt those down, I did look a bit more and found this though. My fridge has 3 possible openings between freezer and fridge (side by side). 1 is the damper door up top, another is similar... |
|
I couldn't find any service sheets or thermistors. I do think the damper door may be faulty, it seems always open wide. I do have a little valve in the lower fridge part to adjust the temperature,... |
|
Ok, finally got a chance to check out your suggestions, and here is what I found. J1 doesn't have pin 2 connected, I am assuming pin 1 is on the right side of the connector on mine since the left... |
|
will do, we turned fridge to 4 setting and all seems well, a guy at my work said keeping settings at 5/5 avoids failing motherboard/fans, but not sure he has the same model/motherboard. |
|
had a ? about it running, my wife said something on the top shelf of the fridge was froze today, everything else seems fine. I had temp settings at 5/5, does this seem odd? My new fan didn't have a... |
| Forum Info | Contact Info | |
|
Join Date: 02-01-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|