Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » sidfink43

View Profile: sidfink43
APP Volunteer
sidfink43 has a spectacular aura about
sidfink43 sidfink43 is offline
Senior Expert
 
Last Activity: Today 04:40 PM 

Signature
-

Whirlpool top load very very slow spin
Didn't see the previous posts, the advice there is correct.
Whirlpool top load very very slow spin
Take off the cabinet and by pass the lid switch and put it in spin cycle. If the clutch housing is turning slowly it may be the transmission or it may be the brakes are dragging. If the clutch...
stubborn tub nut, leaking tub, loud noise
I am fearful that the leak has let water into the mode shifter assembly in which case I think given your problem getting the nut off that a new machine is the best option here.

Sorry not to have a...
Is this a wise investment for a HE3t?
Thanks, and good luck!
Is this a wise investment for a HE3t?
I cannot say this too strongly, do not make a $500 investment in this machine.

For less money you can get a very good top loader, but if you need a front loader you can have a brand new one with a...
Neptune Washer initial loud Spin, now no spin
The loud noise in the spin cycle was likely the failure of the bearing, which in this model means replacing the machine with a new one.

You should not be disappointed, these Neptunes were terrible...
Old Kitchenaid cloths too wet?
No, absolutely not. Just make sure the inside of clutch housing is clean and dry and that when you put it back together the brake cam is in the proper spot.
Forum Info Contact Info
Join Date: 03-29-2009
Posts
Total Posts: 10,771 (5.29 posts per day)
Last Post:
Old Kitchenaid cloths too wet?
10-23-2014 03:54 PM
Find all posts by sidfink43
Find all threads started by sidfink43
Referrals: 0
sidfink43 has no contact information.
Additional Information Group Memberships
N/A
sidfink43 is not a member of any public groups


All times are GMT -7. The time now is 07:58 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17