Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Shombalor

View Profile: Shombalor
Shombalor is on a distinguished road
Shombalor Shombalor is offline
Junior Member
 
Last Activity: 01-30-2013 12:10 PM 

GE Profile dryer - excess vibration
OK, I got the lid on and it's working fine again. I needed to remove the control panel entirely, put the top on, and then attach the control panel to the top. Which is pretty much what you suggested....
GE Profile dryer - excess vibration
The control panel appears to be 1 piece. I loosened it but can't get the top back on. I've spent at least an hour just fiddling with the top. And now I've discovered that the middle plastic piece is...
GE Profile dryer - excess vibration
Hello Simon,
I've gotten the top and front off. The blower fins were clogged with lint. I cleaned everything and have the front back on. However, I'm having a hard time getting the top back on. The 3...
GE Profile dryer - excess vibration
Hello Simon,
Thanks for the quick reply. I have the top off. Is the front just attached with the 2 screws at the top of the side panels? They're the only ones I see and can access. When the front...
GE Profile dryer - excess vibration - GE Profile dryer - excess vibration
My GE Profile electric dryer, which is less than 3 years old, suddenly started to vibrate and make more noise than before. It's always been rather quiet. It only gets used for about 3 loads of...
Overload vs Start Relay - GE Profile dryer - excess vibration
I wanted to let you know that the refrigerator has been fixed. I checked the resistances for the compressor as described and the values were OK. So I replaced the start device with a Whirlpool...
Overload vs Start Relay - Overload vs Start Relay
Hello, I have a Whirlpool side by side refrig/freezer model ED5SHAXMT00. The compressor doesn't start but the fan runs. I hear a buzzing sound and then a click from the bottom of the unit. This...
Forum Info Contact Info
Join Date: 11-21-2012
Posts
Total Posts: 7 (0.01 posts per day)
Last Post:
Overload vs Start Relay
11-21-2012 07:54 PM
Find all posts by Shombalor
Find all threads started by Shombalor
Referrals: 0
Shombalor has no contact information.
Additional Information Group Memberships
N/A
Shombalor is not a member of any public groups


All times are GMT -7. The time now is 09:02 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17