 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Rudy3x@comcast.net |
| View Profile: Rudy3x@comcast.net | |||||
|
|||||
Ice Maker Not WorkingWell, it's been going strong for 24 hours now. Bin is full of ice. No overflow and not even a drip a the back of the unit near the first tray. The operation was a success! My unit seems to always... |
|
Ice Maker Not Working Well, I'm pleased to tell you that for the last two hours I have been making ice with the adjustment screw back to where it was originally. My unit makes 2 cycles, one to push the ice out of the tray... |
|
Ice Maker Not Working About the two cycles as opposed to one. I am certainly willing to accept that one cycle per operation is the correct amount. I guess, since I've never really paid any attention to the ice maker... |
|
Ice Maker Not Working Everything you've sent helped. I am a retired marine engineer, so I have experience in electrical/mechanical operations. I do have a schematic that is inside the module cover. Unfortunately it is... |
|
Ice Maker Not Working Don't worry, we'll get this eventually. I realize the drip repair wouldn't cause this problem, but my removing the ice maker, removing the stripper, and replacing both of them could have jostled... |
|
Ice Maker Not Working I had the cover off the module and this is what I observed. Starting with frozen cubes in the tray. The heater I assume activated and then the motor turned and pushed the frozen cubes into the bin.... |
|
Ice Maker Not Working The water valve seems to be working fine. I had the fill tube out when I removed the ice maker. The problem I have is I get too much water in the tray now. I didn't have that problem before.... |
| Forum Info | Contact Info | |
|
Join Date: 11-06-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
