| Register | FAQ's | New Posts | Today's Posts | Extras |
| » roffman |
| View Profile: roffman | |||||
|
|||||
|
Yes I did replace the relay. I followed some advice on an alternate (better) relay and so far 3 months into it, it is working wonderfully. I ordered 2 replacement relays from Digi-Key and with... |
|
I finally got the nerve (and time) to get to the controller and sure enough, I found a 'smoked' trace on the circuit board. I see that people have had limited success re-soldering the connection. I... |
|
Thanks, I will follow the instructions. Is it possible that I damaged the module by running the dishwasher with low temp water? As mentioned, my water was at 105F (not sure why)? |
|
My machine won't complete a wash cycle. It goes down to "1" then stays there. It will complete a Rinse/Hold cycle normally. I have read through other posts and it looks like I need to at least... |
|
Similar to other posts. Normal wash goes down to "1" and then remains there cycling. Rinse / Hold program works fine. Quick wash does the same as normal. My water temp had slipped down to 105F... |
| Forum Info | Contact Info | |
|
Join Date: 09-26-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|