 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » rhta8702 |
| View Profile: rhta8702 | |||||
|
|||||
I'm Lost-Please Help Me - I'm lost update.The last time I wrote, it was suggested that I replace door latch and check for voltage at computer and voltage at water valves. Replaced door latch. Door now locks. Water valves had NO voltage.... |
|
I'm Lost-Please Help Me - I'm lost update. Water inlet valves tested as per service manual.Tried new Pressure switch, no change. Tested Dispenser switch & motor (as per manual-Tested okay).Drain pump motor-0 ohms on scale,15 ohms on... |
|
I'm Lost-Please Help Me - I'm Lost-Please Help Me Replaced CCU. made sure all connectors are in correct place and in tightly. Now F-13 code appears after machine is on for 3 min. No water enters machine. Tested dispenser motor. Okay ( cam on top... |
|
RE: Is this a MCU problem - More questions - RE: Is this a MCU problem - More questions I was reading the repair manual tonight and decided to test components of CCU before buying and trying new one. All checked okay except "Line Filter". Set digital ohm meter on "30 K ohm". Tested... |
|
Is this a washer MCU problem? - Is this a washer MCU problem? My sister has a Whirlpool clothes washer like mine. Hers is 1 year older. The F2 code comes on. I checked the pump. Spotless. checked the pressure tube. Also clean. Tried replacing the pressure... |
|
can't fix F2 code - can't fix F2 code My sister has a Whirlpool clothes washer identical to mine, only 1 year older. The F2 code came up. I have checked the pump. Spotlessly clean. Checked the pressure sensor tube. Clean and clear. Tried... |
|
Intermittent Drain code problem - Results of quetion posted I did as sidfink43 suggested. Found pressure sensor tube (at washer drum) clogged. Removed and cleaned out in HOT water. Works like a new machine. Thankyou sidfink43 for your help. |
| Forum Info | Contact Info | |
|
Join Date: 03-19-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
